3D PROTECTIVE VISORS

3D PROTECTIVE VISORS
In support of all those who continue to work in the hospital hospital, personal care, food and urban services sectors, and urban services. Thank you all for your involvement and dedication.

*************

ATTENTION VOLUMIC DOES NOT MANUFACTURE AND SELLS VISORS

FOR ALL INQUIRIES VISIT :
LA FERME 3D

*************

PRINT YOUR VISORS
2 VERSIONS TO CHOOSE FROM :

VISIERE PRO 0,5mm
BY VOLUMIC X LaFERME3D
For 0.5mm PET film
No drilling required, simple assembly

 Download 
 VISIERE VOLUMIC 0,5mm 

ou 

VISIERE PRUSA* 0,2mm
BY PRUSA*
For 0.2mm binding sheets
Universal visor requiring 4 holes

 Download 
 VISIERE PRUSA 0,5mm  

*************

This protection has been designed to suit a wide audience, with maximum height and width. If necessary, you can adapt the mask the size of the mask to suit your face or use by re-cutting the plexiglass sheet.

Respect the OPEN SOURCE rules on this project: These protections must be offered as often as possible, however, a minimum price may be charged to cover the cost of purchasing raw materials for large quantities.

Let's stand united!

*************

The headband material is PETG Filament. It provides flexibility and strength. You can also print in PLA if your printer is not a VOLUMIC and does not support this material

The rear tongue can be printed in Flex Filament, or just a good-sized elastic band.

Several networks are in the process of organizing protective foils. 0.5mm PETG, PC or PVC sheets can be ordered can be ordered online, and 0.2mm stationery-type binding sheets binding sheets can be used for the PRUSA model.

*************

The PRO visor was designed by the technical teams of FERME 3D X VOLUMIC. The 3D printers used are designed and manufactured in France by Volumic®.

Special thanks to our friends at PRUSA Research and their team for their help and support in this project based on their research. Děkujeme našim přátelům a starejte se o sebe.