3D PROTECTIVE VISORS
In support of all those who continue to work in
the hospital and personal care sectors,
food and urban services.
Thank you all for your involvement and dedication
*************
ATTENTION
VOLUMIC DOES NOT MANUFACTURE
AND DOES NOT SELL VISORS
FOR ANY REQUEST VISIT :
LA FERME 3D
*************
PRINT YOUR VISORS
2 VERSIONS TO CHOOSE FROM:
VISIERE PRO 0,5mm
BY VOLUMIC X LaFERME3D
For 0.5mm PET film
No drilling required, simple assembly
or
VISOREPRUSA* 0,2mm
BY PRUSA*
For binder sheet 0,2mm
Universal visor requiring 4 holes
*************
This protection has been designed to appeal to a wide audience,
with a maximum height and width. If necessary, you can adapt
the size of the mask according to your face or your use by re-cutting the plexiglass sheet.
Respect the OPEN SOURCE rules on this project:
These protections should be offered as often as possible,
however a minimum price can be asked
to cover the cost of purchasing raw materials
for large quantities.
Let’s stand together and be united!
*************
The material of the headband is PETG Filament
It brings flexibility and resistance. You can also print in PLA if
your printer is not a VOLUMIC and does not support this material
The back tab can be printed inFlex Filament,
or a simple elastic band of good size will do the trick.
Several networks are being organized concerning
the protection sheets. 0,5mm PETG, PC or PVC sheets are available
on the internet in order and 0,2mm binding sheets
stationery type can be used for the PRUSA model
*************
The PRO visor was designed by the technical teams
of theFERME 3D X VOLUMIC. The 3D printers used are designed
and manufactured in France by Volumic®.
Special thanks to our friends at PRUSA Research and their team
for their help and support in this project based on their research.
Děkujeme našim přátelům a starejte se o sebe.
