We have identified what can cause SD card reading errors. Recently, Microsoft has changed the default settings of the formatting utility, it is now set to 32kilobyte sectors by default [...]

The ANTI-OD (Anti Overall Disaster) protection monitors the temperature around the nozzle to detect, for example, the formation of material in a ball on the head (due to a part [...]

10 = Extruder overheating (protection temperature reached)11 = Minimum temperature of extruder 1 reached12 = Maximum temperature of extruder 1 reached13 = Minimum temperature of extruder 2 reached14 = Maximum [...]

10 = Extruder overheating (protection temperature reached)11 = Minimum temperature of extruder 1 reached12 = Maximum temperature of extruder 1 reached13 = Minimum temperature of extruder 2 reached14 = Maximum [...]

The error N°25 was implemented after the realization of the documentation, hence its absence.In any case, this phenomenon is a reading error on the SD card.This may come from the [...]

If you get the error “Extruder overheating”, it means that the extruder is not cooled properly and the cooling body is getting too hot.It is not normal for the protective [...]

If the temperature of the bed does not correspond to what it should display, it is possible that an element has failed. It is likely that the bed temperature sensor [...]